Centering Tool Thierry Magnano
To accurately determine the center of gravity of an airplane
Article published in Issue 10 of the magazine "Looping" September 1991
Hervé.
Hello world!
The radio is nice but you never know the distance traveled by air unless you have special software! Here is a cool site where you can find the distance between each station in France and even within the same department.
to your contacts! Ready! Share!
s thank the creator of the site
jm
Small summary to explain what is this ingenious power supplies.
After discussing the construction fuselage airplane with resin Article on "turbo" Daniel and "Pilatus PC21" Lionel B. (Blog of October 2010), it remained to be seen construction engineering, aircraft wings RC. Among all methods of building two very different from one another are usually used. The all balsa with ribs arranged at regular intervals all along the wing. These are the ribs which form determines the profile of the wing. These ribs made from wood, plastic etc.. ... Form elements of the structure of the wing particularly in traditional construction. The wing is then often interfaced with shrink film (film Solar Oracover, Solartex, silk etc ....)
Another way of building aircraft wings is a method known as the wing polystyrene shuttered balsa. For this method, it is necessary to have a bow hot wire for cutting the shape of the wing in polystyrene which is then shuttered balsa that is glued to polystyrene by holding it snugly with weight or under a press.
So for "the method of the wing shuttered" our friend Daniel has most often turned to the manufacture of the wings of its models.
Exclusively for the blog, he shows us in detail (photographs and electronic schematic) a special power called "chopping" he has the entire construction, design, conceptual design, electronic assembly, assembly and the adjustment in the housing and many trials before the finalization of his machine.
The particularity of this mount is that it can accept multiple types of wire length without overheating of electronic circuits with good flexibility and adjustment. His mount is perfect for making wings and fuselage of aircraft of different sizes.
interest is the use of different cutting edges, long, medium, short and even a little digging wells servos or scoop the material and this without causing overheating of the power arc cutting.
This assembly is ideal for the construction wings and fuselages of airplanes polystyrene Styrodur, EPP, Depron ...
For further information on the implementation of the cutter hot wire designed by Daniel, you can write to us at the email address of the blog that is located at the bottom of the page, I will send emails.
* I thank the authors of these three sites very well done and very explicit, which I've used some photos in order to illustrate the technique of cutting an image for this article : http://jroger.nuxit.net/berliweb/t50_golden_eagle_turbine/page_t50_turbine.htm
http://syntex.modelisme.com/techniques/decoupe_aile.htm
http://www.stage-modelisme.net/des-ailes-en-epp
* Image of Leonardo the genius cartoon Turk and De Groot.
Hervé.